Hotline:18928729291
Time:8:00 - 24:00
VL200 Line Array System Introduction
■Compact passive three-way line source array speakers, small size, high sound pressure, light weight.
The tweeter consists of two neodymium drivers with constant directivity horn, providing a large enough sound pressure level in the middle and high frequencies.
■ 8-inch unit and box structure made of waveguide composition of the midrange sound reinforcement, reduce the box structure and treble structure on the midrange tone, improve the sound pressure level and radiation distance of the midrange.
The two 10-inch units are close to the center waveguide, reducing the interference between the units, diffraction, effectively improve the clarity of the sound.
■ Line array speakers connected, the box between the tightly connected gap shrunk to a minimum, a good combination of each connected line array speakers sound, radiation characteristics tend to be close to the ideal line sound source. Line array speaker connection using three-point hanging method.
The adjustable angle of each box is 0-10 degrees.
■ Before the hanging pieces using inlay, pins and box plane flat, pins fixed in the box, easy to pack, not easy to lose, the box is connected to basically can not see the pins, the whole series of line array strong sense of wholeness.
■ box selected high-density birch plywood production, imported wood glue powder bonding, the surface of the most popular water-based wine point resistant spray paint process
■ Outside the high-strength iron mesh with dustproof cotton, effectively reduce the odd harmonics of the middle and high sound, beautify the product, but also effectively protect the system unit.
■According to the latest theory of line sound source design, effectively improve the coupling characteristics of each unit, ■According to the latest theory of line sound source design, effectively improve the coupling characteristics of each unit.
■Well-modulated crossover, with good frequency response.
■ Give full play to the characteristics of the wavefront surface correction technology, the transmission of clean and precise tone, bringing listeners unparalleled listening enjoyment smooth and accurate sound response in the midrange, the natural acoustic music and music reproduction effect is amazing. With the special subwoofer, so that the bandwidth is wider, the sound as a whole, the three-dimensional sense is stronger.
■ Widely used in theaters, multi-purpose halls, banquet halls, churches, schools, large and medium-sized sports stadiums and large and medium-sized indoor and outdoor performances, language sound reinforcement, etc.
| 型号Model NO. | VL200 |
| 系统类型system type | 2x10"line array three-way linearrays |
| 频率响应Frequency Response | 48Hz-20kHz±3dB |
| 灵敏度Sensitivity | 107dB/1W/1M@±2dB |
| 额定功率Power rating | 900W/8Ω |
| 峰值功率Peak Power | 36000W/8Ω |
| 高音单元Tweeter Unit | NEO 1.75"×2 |
| 中音单元Mezzo Unit | 8"×1 |
| 低音单元Woofer Unit | 10"×2 |
| 最大声压级Peak SPL | 135dB |
| 阻抗/Impedance(Ω) | 8Ω |
| 连接器Cannon Plug | NL4x2+2P |
| 箱体材料Box material | 18mm Plywood |
| 表面喷漆Protective Finish | Black polyurea waterproof anti-corrosion spray paint |
| 指向性Directivity | H120 X V10(Deg) |
| 尺寸Dimension(WxHxD) | 840×285×435(mm) |
| 重量Weight | 34Kg |
VL280
System type: 18 "linear arrangement of secondary severe liabilities
Frequency response: 35Hz-350Hz+3dB
Sensitivity: 106dB/1W/1M @+2dB
Rated power: 600W
Maximum power: 2400W
Bass Unit: 18 '' * 1
Maximum sound pressure level: 133dB
Impedance: 8 ohms
Connector NL4x2
Box material: 18mm/BB plywood
Surface treatment: Floating point wear-resistant black spray paint
Size (An x al x Pr): 840x480x600mm
Net weight: 34kg